Trunk Spoiler ZR1 Style (CHEVROLET CORVETTE 05-13 C6)Aggressive ZR1 StyleQuality Construction - FRP MaterialTrack Inspired StylingUnpaintedLieferumfang(1) Spoiler(1) Hardware KitTUV information:Please clarify with your TÜV auditor on whether a registration is necessary or possible.With questions we are to you naturally available.

Chin Spoiler/Splitter STAGE2 OE - Matte Black (CHEVROLET CORVETTE 2014-2219 C7)Aggressive Street StylingImproves AerodynamicsDurable Injection Molded ABS MaterialMatte Black FinishStraight Forward InstallationLieferumfang(1) Chin SpoilerTUV information:Please clarify with your TÜV auditor on whether a registration is necessary or possible.With questions we are to you naturally available.

Grand Sport Z06 ZR1 Style Side Skirts - Gloss Black (CHEVROLET CORVETTE 2014-2219 C7)   Aggressive Street Styling Improves Aerodynamics Quality Construction Painted - Gloss Black Whats in the box (1) Left Side Skirt (1) Right Side Skirt   TUV information: Please clarify with your TÜV auditor on whether a registration is necessary or possible.With questions we are to you naturally available.

ZR1 Style Front Bumper (CHEVROLET CORVETTE 2014-2219 C7)Styl ZR1Quality ConstructionComplete KitStraight Forward Bolt-on InstallationFront Fascia KitConstructed from Durable OEM-Quality PolypropyleneStraight Forward InstallationShips UnpaintedLieferumfang(1) Bumper Cover(1) Chin Spoiler(1) Upper Grille(1) Lower Grille(2) Grille Extensions(2) Add-ons vents(1) Hardware kitTUV information:Please clarify with your TÜV auditor on whether a registration is necessary or possible.With questions we are to you naturally available.

ZR51 Style Trunk Spoiler (CHEVROLET CORVETTE 2014-2219 C7)Aggressive ZR51 StyleQuality Construction - FRP MaterialTrack Inspired StylingLieferumfang(1) Spoiler(1) Hardware KitTUV information:Please clarify with your TÜV auditor on whether a registration is necessary or possible.With questions we are to you naturally available.

C8 lowering with frontlift 20mm (Corvette C8) Here we present the lowering cuffs developed by SlyStyle and DLP for the Chevrolet Corvette C8. The TÜV approved cuffs lower the front of the car by 20mm.Vehicles with Z51 equipment can also be lowered by 20mm at the rear axle. With the lowering, your vehicle is at the perfect height. In addition, agility is increased and the centre of gravity is lowered. for vehicles with Frontlift System E60 stainless steel V4a highest tensile strength of 650-700NM on the market! can be used and registered for EU & US models tested with different wheel tyre & track plate combinations material & pulsor endurance tested with TÜV parts certificate ! ! Complex installation - Installation should only be carried out by an authorised workshop, as the dampers have to be disassembled with special tools. Calibration tools are also required ! TÜV information: Please check with your TÜV inspector whether registration is necessary or possible.If you have any questions, please do not hesitate to contact us.

AMPP Corvette C8 Z06 Style front Bumper  Z06 style Complete kit includes front camera mounts Made from durable OEM quality PP Bumpercomes unpaintednot suitable for Z06 model TÜV information: Please clarify with your TÜV inspector whether registration is necessary or possible. If you have any questions, please do not hesitate to contact us.

Corvette Z06 Style Rear Diffuser + Exhaust Tips (C8 2020-2025 Stingray)Give your Corvette C8 Stingray an even more aggressive and sporty look with this Z06-style rear diffuser and matching exhaust tips. Perfectly tuned for 2020-2025 models. TÜV information: Please clarify with your TÜV inspector whether registration is necessary or possible. If you have any questions, please do not hesitate to contact us.

DUCKBILL Style Rear Spoiler (CHEVROLET CORVETTE 2020-2023 C8) Aggressive Track Styling Quality Construction Track Inspired Styling Injected Molded Construction Unpainted What's in the Box (1) Spoiler (1) Installation Kit (1) TUV Materialgutachten Certificate TÜV information: Please clarify with your TÜV inspector is possible. If you have any questions, please do not hesitate to contact us.

Z51 Style Rear Spoiler (CHEVROLET CORVETTE 2020-2023 C8) Aggressive Track Styling Quality Construction Track Inspired Styling Notched Design for Maximum Rear Visibility Injected Molded Construction Unpainted What's in the Box (1) Spoiler(1) Installation Kit(1) TUV Materialgutachten Certificate TÜV information: Please clarify with your TÜV inspector is possible. If you have any questions, please do not hesitate to contact us.

High Wing Rear Spoiler - Gloss Black (CHEVROLET CORVETTE 2020-2022 C8) Aggressive Track Inspired Design Injected Molded Construction Gloss Black Painted What's in the Box (1) Rear Spoiler (1) Installation Kit (1) TUV Materialgutachten Certificate TÜV information: Please clarify with your TÜV inspector is possible. If you have any questions, please do not hesitate to contact us.

STINGRAY Style Chin Spoiler/Splitter (CHEVROLET CORVETTE 2014-2219 C7)Aggressive Sreet StylingImproves AerodynamicsPolyurethane (PU) MaterialStraight Forward InstallationUnpaintedLieferumfang(1) Chin SpoilerTUV information:Please clarify with your TÜV auditor on whether a registration is necessary or possible.With questions we are to you naturally available.

OE Style Trunk Spoiler (CHEVROLET CORVETTE 2014-2219 C7)Aggressive Track Inspired DesignInjected Molded ABS ConstructionEasy InstallationShips UnpaintedLieferumfang(1) Rear Spoiler(1) Installation KitTUV information:Please clarify with your TÜV auditor on whether a registration is necessary or possible.With questions we are to you naturally available.

COMPATIBLE: With all C7 Vettes from 2014-2219, these complete Chevrolet LED tail light assemblies will swap directly in place of the original C7 Corvette tail lights, use all of the stock mounting points, and should not take more than 30 minutes to install the pair.   PLUG N PLAY: Wiring is easy too! The XB LED tails are designed to work without any special wiring. These C7 Corvette tail lights will plug into the factory connectors for the stock lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No additional resistors, modules, etc needed!   STYLE: These Chevrolet LED tail lights don't look out of place on the Vette either. While their styling is far more modern than the old incandescent tail lights - they're not going to awkwardly turn your Vette into a spaceship either! We love the way they look and think they'd be a welcome upgrade to the rear end of any C7 Corvette.   WELL-BUILT: These C7 Corvette tail lights’ durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The injection molded ABS housing is light-weight and much stronger than comparable cheap alternatives. The XB Tail lights may not be the cheapest new Chevrolet LED tail lights for your Corvette, but they're OE quality, and as the saying goes, you pay for what you get.   What is in Box (1) Kit MORIMOTO Tail Lights   TUV information: Please clarify with your TÜV auditor on whether a registration is necessary or possible.With questions we are to you naturally available.

FACTS & FIGURES DESCRIPTION NO SUBSTITUTES: Yeah the HID headlights that came on the C7 Vette's perform well enough, but as the saying go: stock sucks! Upgrade your setup to a full LED setup with Morimoto! Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform the alternatives. They are the first and last aftermarket option that the C7 Corvette Community needs, because when it comes to headlights: there is nowhere else to upgrade from here. PERFORMANCE: We've always been blown away by the fact that even though the C7 came from the factory with OEM HID headlights, the performance was sub-par. The low quality optics inside the lights were not only poorly designed to begin with, but often lose 50% or more of their intensity over time due to de-lamination of the reflector bowl inside - leaving you with next to no light output to illuminate the road. The good news is that Morimoto's 2014-2019 Corvette headlights produce a well defined beam pattern with a great amount of width, intensity, and a proper distribution of light that will far out-perform the stock setup. DOT APPROVED: Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their projector optics meet & exceed all SAE, DOT, and FMVSS108 regulations when aimed properly...and that's easy to do with their integrated vertical/lateral adjusters. PLUG-N-PLAY: Wiring is easy too! This LED projector headlight kit is designed to work on your C7 Vette without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty. SEQUENTIAL LED DRL: Game Changer! Their LED daytime running light is powered by Osram 5000K LEDs and is insanely bright, easily visible during the day. They have a fully sequential LED turn signal behind modern "3D" type optics on the outside edge of the headlight too. WELL-BUILT: Their UV-coated polycarbonate lens will resist the test of time, ensuring your Vette's new headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade Osram LED chips that produce the light. These complete headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring. THEY LOOK: Amazing. At least in our opinion! The subtle elements incorporated in their design are more than enough to make them stand out, but they're clean enough to be considered top of the line original equipment to those who don't know any better. WHAT'S INCLUDED HEADLIGHTS:2x (One Pair) 14-19 Corvette C7 XB LED Headlights WIRING:Plug and Play Harness, Fuse Tap, DRL Modules WARRANTY:5 Years (Click for Details) COMPATIBILITY CHEVROLET CORVETTE C7:2014-2019 REPLACES GM PART #:23148368, 84501052, 23216692 COMPLIANCE:DOT, SAE, FMVSS108 STANDARDS NOTE:These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known. TECH SPECS INTENSITY:2,600lm (raw; each) TRAFFIC PATTERN:LHD Only INPUT:GM Multi-Pin OEM BEZEL COLOR:Gloss Black FUNCTIONS:DRL (White), Turn, Parking, Low, High MATERIAL:ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens) OPTIC:Kuria Optic BI-LED UV COATING:Momentive UVHC3000  TÜV information: Please check with your TÜV inspector whether a registration is necessary or possible. If you have any questions, we are of course happy to help.

GRAIL flap exhaust system for the Corvette C8 The GRAIL exhaust system catapults the Corvette C8 to a whole new level of sound volume from the 6.2L LT2 engine. Due to the massive 76mm (3 inch) pipes, the maximum sound ecstasy occurs as soon as the engine is started. Thanks to intelligent flap valve control, the driver can still enjoy the best of both worlds. Powerful motorsport sound with the flap setting "Performance" as well as conservatively soft sounds in "Comfort" mode to be whisper quiet on long distances or in the neighbourhood.All of this, of course, road legal in Germany. The features at a glance: -3 inch stainless steel exhaust system made in Germany using the TIG welding process. -Milled exhaust flaps with mounting for original Chevrolet servo motors -Massive sound improvement with simultaneous performance improvement due to optimised exhaust gas flow (absorption silencer design) -Approved for import vehicles thanks to GRAIL noise certificate. §21 approval required. Approval at several locations possible. -Approval for EU models: ECE approval in preparation, planned for 01/2022.  If you have any questions about TÜV approval or need help, please contact us before purchasing.

Our Corvette C8 stage transducers Who doesn't know it, in the workshop the Corvette has to be put on the stage and the search for suitable stage receivers - especially for lowered vehicles - begins. avoids damage to the underbody and sill panelsremains on the carsuitable for EU and US modelswith ventilation & water drainage openings for the framespecial plastic absolutely weatherproof

CS1 front splitter for the C8 aerodynamic and unique designForm meets Functionmore downforce up to 50kg to the Z51 splitter1 part !Mounting with the original screw connectionextremely light, break-proof & stablematerial from aeronautical engineering (CFK/GFK)incl. parts certificate !VMAX testedFlaps are available on requestMADE IN KREFELD GERMANYunpainted! No ABS plastic - extremely stable ! TÜV information: Please clarify with your TÜV inspector is possible. If you have any questions, please do not hesitate to contact us.

CSS1 side skirts for the C8 aerodynamic and unique designForm meets Functionmore downforce for higher cornering speedless stone chips on the rear wingsextremely light, break-proof & stablematerial from aeronautical engineering (CFK/GFK)incl. parts certificate !MADE IN KREFELD GERMANYunpainted! No ABS plastic - extremely stable ! TÜV information: Please clarify with your TÜV inspector is possible. If you have any questions, please do not hesitate to contact us.

CHA1 Rear Spoiler Wickerbill Approaches for the C8 aerodynamic and unique designForm meets Functionsuitable for the Z51 rear spoilermore downforce - up to 80kg on the rear axleextremely light, break-proof & stableglued, screwed/rivetedmaterial from aeronautical engineering (CFK/GFK)incl. parts certificate !VMAX testedMADE IN KREFELD GERMANYunpainted! No ABS plastic - extremely stable ! TÜV information: Please clarify with your TÜV inspector is possible. If you have any questions, please do not hesitate to contact us.

CHA1 Rear Spoiler Wickerbill Approaches for the C8 aerodynamic and unique designForm meets Functionsuitable for the Z51 rear spoilermore downforce - up to 80kg on the rear axleextremely light, break-proof & stableglued, screwed/rivetedmaterial from aeronautical engineering (CFK/GFK)incl. parts certificate !VMAX testedMADE IN KREFELD GERMANYunpainted! No ABS plastic - extremely stable ! TÜV information: Please clarify with your TÜV inspector is possible. If you have any questions, please do not hesitate to contact us.

NAP QUAD flap exhaust system for the Corvette C8 StingrayFeatures A matching rear diffuser is supplied. This is specially designed for our exhaust system. Optionally available in black-painted or in carbon. Our diffuser can be fitted and removed without modification to the vehicle. The two electronic Highspeed 3″ NAP flaps only need a few milliseconds to open and close. The flaps are electronically damped, which prevents material fatigue and leaking hard stops. The flap control behaves completely passively. No intervention in the original Corvette CAN control is necessary. Reversion to the original condition is possible without manipulation of the vehicle software. This allows the manufacturer's warranty to be retained. Switching of the flap modes via the Z-mode button (equipment-dependent) or separately via the NAP button. Thermal insulation that prevents heat damage to your Corvette Stingray. Production serial number engraved on the silencer. The system emphasises the powerful expression of your Chevrolet Corvette Stingray C8 with the appropriate sound. In addition, the power and torque are increased NAP Automatic Wireless Valve Control The flap exhaust is controlled by the NAP Automatic Wireless Valve Control. The NAP Valve Control electronic control unit is the brain of our flap exhaust systems. Because the NAP Valve Control unit can read Canbus signals coming from the engine's ECU, it ensures that you are always driving in compliance with the law, no matter what mode you are in. The system is bound by the parameters set by the EU. If necessary, it intervenes smoothly and seamlessly. The electronic flaps are switched from sporty comfort to a throaty racing sound via the NAP button in the cockpit. The NAP Automatic Wireless Valve Control is based on an interference- and tamper-proof connection between the NAP CAN-BUS radio dongle and the flap control. We have reduced the hardware of the valve control to minimal dimensions. The control unit including the radio module is hardly thicker than a cable.This results in much simpler installation: the cumbersome laying of cables through the entire vehicle is now a thing of the past!In addition, our NAP CAN-BUS radio dongle can be looped through, i.e. you can connect other devices to the CAN-BUS and operate them without interference.TÜV informationThere is a generally valid ABE for Germany and an EC approval number for the EU. The number is engraved on the system and you will also receive a written copy of the certificate. With the exception of a few countries, the ABE is even valid worldwide. Our sport flap exhaust system is registration-free.

C8 radiator grille 1.5mm aluminium (Corvette C8) The front radiators are in full view and are covered with stone chips and insects after only a short time. Our radiator grilles offer a remedy and at the same time look like they came from the factory. 1 pair of radiator grilles High-gloss black powder-coated extremely high quality OEM look Aluminium 1,5mm material thickness incl. mounting set TÜV information: Please check with your TÜV inspector whether registration is necessary or possible.If you have any questions, please do not hesitate to contact us.

C8 Ceramic High Performance Spark Plug Cable Set (Corvette C8) These Hi-Performance spark plug wires offer excellent energy transfer while providing the highest level of RFI/EMI suppression.They are ideal for vehicles with fan headers and are a great accessory for the race track.Burnt ignition wires, power loss and misfires are all history. Just like ugly thermal insulation in the engine compartment. Version with stainless steel connectors and ceramic spark plug connector the ceramic spark plug connector can withstand up to 1,100°C Each cable is equipped with an ultra-high-temperature double silicone wire rated for up to 350°C direct heat. Ferro-spiral core wire designed for heavy duty use. 135° angled. for GM LS2 LS3 LS4 LS7 & LT engines TÜV information: Please check with your TÜV inspector whether registration is necessary or possible.If you have any questions, please do not hesitate to contact us.

Corvette C8 Z06 Design HeckspoilerMade from our proven CFRP/GRP materialsuitable for the C8 Stingray Coupe and Convertiblecompletely own designunpaintedC8 Z06 rear spoiler Z07 packageincl. reinforcement strut behind rear apronincl. mounting materialincl. cover fins for the superfluous holes What's in the Box1 x Rear Spoiler 1x parts certificate TÜV information:Please clarify with your TÜV inspector whether registration is necessary or possible. If you have any questions, please do not hesitate to contact us.